HomeGrownRadioNJ

LED light bars for trucks attach close to the hinge from the tailgate and supply an additional degree of night time safety. These light bars can be found in a prrr-rrrglable bar fashion so that as a typical number of LED Light Module. The majority of the strips are powered through the truck's hitch receiver plug. The LED bar strips are flexible and signal once the truck signal bar is switched. The sunshine bar will also show brake and reverse lights.

        1

        Unroll the flexible LED light bar and put it simply underneath the tailgate hitch where it won't be squeezed or damaged once the tailgate is decreased.

        2

        Peel the adhesive remove the rear of the LED light bar. Then, press the sunshine bar into position. Grab your hands on the middle wire plug adapter being released from the LED bar strip.

        3

        Plug the LED bar strip plug in to the truck's hitch wire plug. This plug is situated just near the tow hitch receiver underneath the rear bumper.

        4

        Test the LED Bar Light by beginning the18 wheeler and turning the lights on. Change the18 wheeler into reverse to check the opposite LED lights. Make use of the turn signals to ensure the light bar is signaling correctly.