Procedures: NOTE! Change the hydraulic oil filter after the first 50 operating hours, thereafter every 500 operating hours.
1.Carefully clean the hydraulic oil tank cap (1) and the area around it. 2.Loosen and screw out the oil tank cap (1) with a suitable tool. Notice: Take care of filters, oils and liquids in an environmentally safe way.
Figure 1 Hydraulic oil tank with integrated oil filtercap 3.Remove the oil filter (1).
Figure 2 Hydraulic oil return filter, replacing oil filter element
4.Insert a new filter element. NOTE! Make sure that the filter element is fitted correctly in itīs seat. Figure 3 Hydraulic oil return filter, replacing 5.Assemble and tighten the oil tank cap.