Possible Cause: 1. Fuel Level is low in the fuel tank. 2. Fuel sensor not connected to machine revolver harness. 3. Faulty fuel sensor.
Diagnosis: 1. Check the fuel level in fuel tank. 2. Check fuel senor connection with machine revolver harness. 3. Check the resistance output of fuel sensor between machine grounds & Pin no B of fuel sensor.
Fuel sensor. output shall be between 12 - 100 Refer below photograph for fuel sensor connection.
Corrective Action:- 1. Refill the fuel in the tank 2. Connect properly fuel sensor with revolver wire harness. 3. Replace the fuel sensor.